toplocalmelbourne

Best Structural Engineers in Melbourne

We found and ranked Melbourne's best structural engineers. Choose the ones you want and we message them for you.

Request quotes

  • Free, no sign up
  • We take no commission
  • You deal with them directly

Or see how the 10 compare

A structural engineer works out whether a building will stand up: the beam over a new opening, the footings for an extension, the cause of a crack. Every firm below has an engineer on the Victorian register in civil or structural engineering.

  • 106checked
  • 24made the cut
  • 10ranked here
  • 100point score
  • Updated

The top 10 structural engineers, compared

We did the checking, so this list is the short one. Ranked by score. A tick is something the business states on its own website; if a tick is missing, their site does not mention it, so ask.

  1. 01
    85 / 100TL score

    Irwin Structures

    Based in Port MelbourneMelbourne and Victoria

    • Inspections and reports
    • Cracks and underpinning
    • Commercial projects

    Port Melbourne forensic engineers who diagnose cracking and structural problems in buildings, design remedial works and write expert reports for disputes, led by a principal with 40 years' experience.

    • Building investigations
    • Forensic engineering
    • Remedial works design
    • Expert witness reports

    Registered Professional Engineer PE0000895 (Civil and Structural)Fellow of Engineers Australia

    Website Google Maps

  2. 02
    79 / 100TL score

    Coulthard Shim

    Lilydale, Melbourne and Victoria

    • Inspections and reports
    • Plans for permits
    • Commercial projects

    Structural and civil engineering consultancy in Lilydale doing structural design, soil reports, building investigations and site inspections for homes, wineries, factories, schools and commercial buildings across Victoria.

    • Structural design
    • Civil design
    • Soil reports
    • Building investigations

    Registered Professional Engineers (Civil and Structural)Member of Engineers Australia

    Website Google Maps

  3. 03
    77 / 100TL score

    Miglic MacLeod

    Based in MelbourneMelbourne and Victoria

    • Plans for permits
    • Commercial projects

    St Kilda Road consultancy with roots going back 50 years, designing structures in timber, concrete, steel and masonry for apartments, schools, health buildings and heritage projects.

    • Structural engineering
    • Civil engineering
    • Heritage consultancy

    Registered Professional Engineer (Civil and Structural)Member of Engineers Australia

    Website Google Maps

  4. 04
    75 / 100TL score

    Silver Wolf Projects

    Based in Moonee PondsAustralia wide

    • Inspections and reports
    • Plans for permits
    • Commercial projects

    Engineering and building consultancy with a Moonee Ponds office, known for forensic inspections and reports on building damage, plus structural design and certification for builders.

    • Forensic engineering inspections
    • Civil and structural engineering
    • Non destructive testing
    • Stormwater and flood analysis

    Registered Professional Engineers (Civil and Structural)Member of Engineers Australia

    Website Google Maps

  5. 05
    73 / 100TL score

    E2E Design Group

    Based in BundooraMelbourne and Victoria

    • Inspections and reports
    • Plans for permits
    • Cracks and underpinning

    Bundoora design firm covering a home project from start to finish: town planning, building design, soil testing, surveying, structural and civil engineering, forensic reports and remedial works.

    • Structural and civil engineering
    • Forensic engineering
    • Soil testing
    • Building design

    Registered Professional Engineers (Civil and Structural)Directors are members of Engineers Australia

    Website Google Maps

  6. 06
    70 / 100TL score

    Webber Design

    Based in Melbourne CBDMelbourne, Sydney, Adelaide and Perth

    • Plans for permits
    • Commercial projects

    Structural engineers with a Queen Street office, designing high rise towers, apartments, build to rent, student housing, aged care and retail projects across four capital cities.

    • Structural engineering
    • High rise and mixed use
    • Residential and build to rent
    • Student housing and aged care

    Registered Professional Engineers (Civil and Structural)

    Website Google Maps

  7. 07
    67 / 100TL score

    Maurice Farrugia & Associates

    Melbourne

    • Plans for permits
    • Commercial projects

    Melbourne consultancy designing buildable, cost effective structures for houses, townhouses, unit developments and commercial jobs, plus civil site works and stormwater drainage design.

    • Structural building design
    • Civil site works
    • Stormwater drainage design
    • Site supervision

    Registered Professional Engineer PE0000464 (Civil and Structural)

    Website Google Maps

  8. 08
    67 / 100TL score

    BG&E

    Based in Melbourne CBDAustralia and overseas

    • Plans for permits
    • Commercial projects

    Large civil and structural engineering consultancy with a Collins Street office, working on towers, apartments, heritage buildings, bridges and infrastructure in Australia and abroad.

    • Structural engineering
    • Civil engineering
    • Façades
    • Heritage and adaptive reuse

    Registered Professional Engineer (Civil)

    Website Google Maps

  9. 09
    63 / 100TL score

    AZTA Engineering

    Based in DocklandsMelbourne and Victoria

    • Inspections and reports
    • Plans for permits
    • Cracks and underpinning
    • Commercial projects

    Docklands engineers focused on forensic structural investigations, pre purchase structural inspections, defect and floor level surveys, insurance claim assessments and structural design for homes and commercial buildings.

    • Forensic structural investigations
    • Pre purchase structural inspections
    • Building defects inspections
    • Floor levels surveys

    Registered Professional Engineer PE0017723 (Civil and Structural)Member of Engineers Australia

    Website Google Maps

  10. 10
    51 / 100TL score

    Intrax

    Based in Melbourne CBDAustralia wide

    • Inspections and reports
    • Plans for permits
    • Cracks and underpinning
    • Commercial projects

    National engineering, surveying and geotechnical firm based on La Trobe Street, doing footing design and soil reports for new homes plus remedial and forensic investigations of damaged buildings.

    • Residential civil and structural engineering
    • Geotechnical and soil reports
    • Remedial and forensic engineering
    • Land surveying

    Registered Professional Engineer (Civil)

    Website Google Maps

How we ranked Melbourne's structural engineers

Google Maps returned 106 Melbourne firms for structural engineering. A firm only went further if we could name one of its engineers and find that person on the Victorian register of professional engineers, current and registered in civil or structural engineering. Directories, builders and firms with no named engineer were left out, which left 24 firms to score.

Reviews are thin in this trade, so stars do not decide the order. Each firm gets a score out of 100 from facts anyone can check: up to 30 points for years trading on the Australian Business Register, 15 for a clean disciplinary record on the engineers register, 10 for Engineers Australia or Consult Australia membership, 15 for an engineer on the National Engineering Register, up to 10 for an open website showing ABN, address and registration number, and up to 10 for public reviews. No awards points were given to anyone. Nobody pays to be listed.

How the score works

How much does a structural engineer cost in Melbourne?

A site inspection with a short written report is the most common job, and a national price guide updated in March 2026 puts the average at about $560 before GST, with simple visits running from $500 to $755. Expect more where the engineer has to measure floor levels, open up a wall or monitor a crack over several visits.

Design work costs more because it ends in calculations and stamped drawings a building surveyor can rely on. The same guide puts beam design for removing a wall at about $1,900, a report for council or permit approvals at about $1,500, structural design for an extension at $2,000 to $8,000 and full engineering for a new home at around $10,000, more on reactive clay.

Hourly rates average about $150, from roughly $90 for a graduate to $250 for a senior engineer. Ask whether the fee covers one site visit or several, whether amendments are charged, and how quickly drawings come back.

Does a structural engineer have to be registered in Victoria?

Yes. Anyone providing professional engineering services in civil or structural engineering in or for Victoria must be registered under the Professional Engineers Registration Act 2019, a rule phased in between 2021 and 2023. Practising without registration is an offence. Work done under the direct supervision of a registered engineer is exempt, which is how graduates contribute.

Registration alone is not enough for building work. To provide professional engineering services in the building industry, the engineer also needs an endorsement on that registration and must hold professional indemnity insurance at all times. Registration and endorsement last three years and are renewed with continuing professional development.

How do you check an engineer on the Victorian register?

The public register, run for the Business Licensing Authority by Consumer Affairs Victoria, shows each engineer's areas of engineering, whether the registration is endorsed, its dates, any conditions and any disciplinary orders. Search it by the engineer's name, not the firm's, because firms are not registered.

What do CPEng, NER and RPEV mean after an engineer's name?

RPEV is shorthand for a registered professional engineer in Victoria, the legal requirement described above. NER means the engineer is listed on the National Engineering Register run by Engineers Australia, which anyone can search by name, discipline and location. CPEng, chartered professional engineer, is a credential from Engineers Australia that sits alongside the register listing.

Neither NER nor CPEng replaces Victorian registration, and the licensing authority will not accept an NER certificate as proof of qualifications when an engineer applies. Treat them as extra assurance that the engineer has been assessed by peers and keeps up continuing development, then check the state register for the legal part.

Structural engineer, building inspector or building surveyor?

A building inspector looks over a house and describes what is wrong, often for a buyer. A structural engineer explains why, for example whether a crack is old settlement or active movement in the footings, and designs the fix, from a new beam to underpinning. A building surveyor issues the building permit and relies on the engineer's computations to do it.

If an inspection report recommends a structural engineer, that is the point to call one. For a renovation, the usual order is drawings from an architect or draftsperson, then engineering, then the permit. Many engineers will also inspect during construction, which some surveyors require before the slab is poured or the frame is covered.

  • Who will do the work, and can I see their registration on the Victorian register?
  • Is that registration endorsed for the building industry?
  • How many site visits does the fee include?
  • Do I need a soil report, and can you arrange it?
  • Will your drawings and computations go straight to my building surveyor?

The shortlist is done. Send one request.

Tell us the job in a few taps and we pass it to up to five of the structural engineers above. They reply to you directly.

Request quotes

Questions and answers

Structural Engineers in Melbourne: common questions

How much does a structural engineer inspection cost in Melbourne?

About $560 before GST on average for a residential inspection with a short report, according to a national price guide updated in March 2026, with simple site visits from $500 to $755. Monitoring a crack over several visits, measuring floor levels or a detailed report for an insurer costs more.

How much does it cost to have a beam designed to remove a wall?

Around $1,900 for the site assessment, calculations, specification and certification, based on the same March 2026 price guide, and roughly $2,000 for a single beam over a standard three metre opening. Wider open plan spans need several beams and cost more. The builder's work to install the beam is separate.

Do structural engineers need to be registered in Victoria?

Yes. Civil and structural are two of the five prescribed areas, so anyone providing professional engineering services in them in or for Victoria must be registered. Mandatory registration was phased in between 2021 and 2023, and practising without it is an offence carrying significant penalties.

How do I check a structural engineer's registration?

Search the engineer's name on the professional engineers public register run by Consumer Affairs Victoria. It shows the areas of engineering, whether the registration is endorsed for building work, the dates, any conditions and any disciplinary orders or convictions. Companies are not registered, so search the person who signs the work.

What is a building industry endorsement for an engineer?

It is an addition to an engineer's Victorian registration that allows them to provide professional engineering services in the building industry. A registered engineer without it cannot do that work. Endorsed engineers must hold professional indemnity insurance at all times and confirm it in an annual statement.

What does NER mean for an engineer?

It means the engineer is listed on the National Engineering Register, kept by Engineers Australia for engineers assessed against its professional standards. You can search it by name, discipline and location. It is a useful extra check but does not replace Victorian registration, which is the legal requirement.

How long does registration as a professional engineer last in Victoria?

Three years. Registration and any building industry endorsement must then be renewed, and renewal depends on continuing professional development. Endorsed engineers also lodge an annual endorsement statement confirming their insurance, so an engineer who stops working in building can let the endorsement lapse while staying registered.

How much does structural engineering for an extension cost?

Usually $2,000 to $8,000 for the structural design of an extension, with a two storey extension around $5,000, according to a national price guide updated in March 2026. Full engineering for a new home is about $10,000, and reactive clay sites in Melbourne can push it to about $15,000.